Allison Triple Disc Converter
2001 - 2016 Duramax (LB7, LLY, LBZ, LMM, LML)
This triple disc converter features a billet front cover and can be ordered with the stock stator, or a billet stator that’s guaranteed to never break. If you plan to drag race, sled pull, or perform boosted launches, you will need to upgrade to a billet stator for an additional $250. See our information on which converters are built with a billet stator in the product image!
**Stall Speeds listed above are approximate & will vary based on engine torque - there is additional information to help you determine which converter would be best for your truck BELOW - if you have questions on which stall to order, please call us at (563) 778-2719**
If you need a rush order, please call us to order! (563) 778-2719
** TO SHIP TO HAWAII/ALASKA & ANY LOCATION OUTSIDE OF THE LOWER 48 STATES - PLEASE CALL FOR A QUOTE BEFORE PURCHASING
At this time we are experiencing a large volume of converter orders - Please allow 5-10 business days before shipment. Fixed freight cost ONLY applies to UPS Ground Shipping. If you select anything other than ground freight on a converter order we will need to contact you to discuss availability & adjust freight amount. If you need a rush order, please call us at (563) 778-2719
The chart below shows the K factor and torque ratios as related to our converter stalls. Below is how to interpret the K-Factor and Torque Ratio numbers:
• The lower the k factor number the better the converter will couple, the higher the k factor number the easier it will spool up.
• The torque ratio number is the torque multiplication number – i.e. if you have a 1.85 TR, for every 100 lbs of input torque the converter will deliver 185 lbs of output torque (this is at a 0 speed ratio or at converter stall ). This ratio will go down as the speed ratio goes up.
|GOEREND CONVERTER||APPROX STALL||K-FACTOR||TORQUE RATIO|
|"G" BILLET STATOR||1800-1900 RPM STALL||95||1.8|
|"X" BILLET STATOR||1800-1900 RPM STALL||93||1.93|
|"E" BILLET STATOR||1800-2200 RPM STALL||98||1.8|
|"C" STOCK STATOR||1900-2200 RPM STALL||99||1.8|
|"DK" BILLET STATOR||1900-2200 RPM STALL||98||1.88|
|"R" BILLET STATOR||2000-2200 RPM STALL||101||1.85|
|"B" STOCK STATOR||2300-2500 RPM STALL||110||2.0|
|"K" BILLET STATOR||2500-2700 RPM STALL||88||1.65|
|"J" BILLET STATOR||2700-3000 RPM STALL||113.5||1.94|
|"Q" BILLET STATOR||3200-3400 RPM STALL||132||1.4|
In the future we will be adding more of this type of information and are more than happy to explain the differences should you ask.
What sets our converters apart from the competition?
We design, manufacture, and build our converters as well as many of the internal converter components in-house from start to finish. This ensures that our dimensions are correct and will work with your transmission! Since our converters are all produced in-house, when you call us you are talking directly to the manufacturer – which is very rare in this business – and allows us to answer all of your questions quickly and accurately. Our 7 in-house CNC machines are used to manufacture our billet converter covers, billet clutch dampers, stators, stator caps, races, and many more of the components in our converter builds. Our knowledge, equipment, and PATENTED converter components allow us to build your converter to match your needs – no matter if you use it as a daily driver – or a dedicated race truck! At Goerend we care about our customers - our multiple patents have PERFORMANCE in mind – they have been created to cure specific performance problems – not patented simply to ease the manufacturing process!
We have been in the automotive field since 1947 – with a focus on diesel trucks and converters for the past 40 years. At Goerend’s we value QUALITY not quantity, which is why we have invested in several on-site specialty tools and quality equipment to allow us to manufacture and test our products beyond what our competition can do – making us a top producer of quality converters for diesel trucks. One of our specialty equipment pieces is our one-of-a-kind SuperFlow dyno which is comparable to the type of equipment found in research labs at the OE (Original Equipment) Level – i.e. GM, Ford, Chrysler, Toyota, ETC. It is used to test our converters for: Torque Converter Pump K-Factor, Turbine K-Factor, Speed Ratio, and MUCH more! See more of our equipment pictures on our “Goerend Equipment Page”.
Allison converters that are ordered with a stock stator should NOT be used for sled pulling, boosted launches, towing, or drag racing. The stock stator is made from aluminum which becomes soft at high temperatures and may cause the stator to break. If the stator breaks, the small pieces then fly around inside the converter and become lodged in the impeller and turbine – in turn completely ruining the converter. At Goerend Transmission, we manufacture BILLET stators that have a lifetime warranty and are “GOEREND-TEED” to never break. If you plan on doing any sled pulling, boosted launches, towing, or drag racing – you must upgrade to a billet converter to avoid any possible damage. You can find images of our billet stator machining process on our “Equipment Page”
Torque Converter Core Charge: You must select the additional $300 core charge to complete your order. When we receive a usable core of the same model back, we refund the core deposit. See our Shipping and Return page to learn how to safely return your core to us and receive your full core refund.
Please allow 2-5 business days before shipment. Fixed freight cost ONLY applies to UPS Ground Shipping. If you select anything other than ground freight on a converter order we will need to contact you to discuss availability & adjust freight amount. If you need a rush order, please call us at (563) 778-2719
Posted by Unknown on Apr 13th 2017
Was recommended the X converter by Scott at SDP. I love this converter the lockup is so smooth almost cant tell when it does even racing i cant feel the lockup happen. A good smooth and solid lockup makes a big difference on the life of hard parts. was on a built LBZ making just under 700hp with just a built trans and this converter. No billet parts in the trans.
Posted by Nathan McCutchen on Apr 9th 2017
I absolutely love my "R" converter. Paired to my SDP built transmission it is awesome. Lockup is nice and smooth but firm. Not at all harsh like some of the competitors. I can really feel how it will help prolong the life of a built transmission! Would not hesitate to recommend Scott or Goerend to anyone!
Posted by Joe Martinez on Mar 12th 2017
I had Mike at Inglewood Transmission build my Trans 17 months ago. Mike recommended the "R" converter for my application, welding rig with stock fuel and air, so she's right around 11k lbs everyday. The transmission as a whole performs flawlessly, smooth crisp shifts and surprisingly smooth TC lock up under full power... EVERY TIME! You can't put a price on reliability when you depend on your rig to make a living... That's why I went with the best!
Posted by Brad Thompson on Mar 7th 2017
Always have good luck with goerend converters, great customer service and awesome product.
Converter works great for everyday driving, towing, racing, and sled pulling !
Posted by Cody Bradley on Mar 7th 2017
I purchased the Goerend X converter with the billet stator to be paired along with a built trans for my 07 LBZ Duramax. I couldn't be happier. This converter locks up great wither I'm Wot on my built trans race tune or pulling a trailer in my tow tune. I very satisfied with my choice to go with Goerend and I'd recommend this product to anyone.